Thread: Cncest 6060 controller rebuild
-
09-02-2020 #11
Mike your location shows Lincoln so if your not a million miles away from Goole then your more than welcome to bring the machine over to my place and I'll see if I can get it going.
Chances are it's just a wiring issue or setting like as been suggested.
If it's more than that then I'm more than happy to advise and help you build a control for it.
-
09-02-2020 #12
That is very kind of you and I’m more than happy to come over and see you, if you could let me know when is good for you, would you need the whole router or just the controller, regards Mike
-
09-02-2020 #13
This week Wednesday is my best day but next week Monday or Wed I'm free.
It will be best if you bring the whole machine and PC etc because I can then test it properly. I'll also set it up for you ( provided it's not dead) because if motors are not tuned correctly then you could still have troubles from stalling motors etc.
I will PM you my Address, it's business address and 2 mins off the M62.
-
09-02-2020 #14
Hi Dean, Wednesday is good, I will ring you Wednesday morning to let you know what time to expect me, Thankyou once again, regards Mike
-
09-02-2020 #15
Ok, Mike. There is one thing I forgot to mention. While my help is FOC there is however an admission Fee of 1 packet of Chocolate Hobnobs which is a long-standing charge first levied by a CNC engineering Legend John S who is sadly no longer with us, so in the grumpy Old Gits memory, I'm carrying on this tradition. Plus I love hobnobs . .
-
09-02-2020 #16
Hobnobs it is then
-
10-02-2020 #17
Good to see traditions maintained!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNCEST 3040T Z drive issues
By davitc in forum Machine DiscussionReplies: 9Last Post: 03-01-2020, 12:39 PM -
Control box rebuild
By Palletlad in forum Electronic Project BuildingReplies: 29Last Post: 02-07-2019, 10:36 AM -
NEW MEMBER: cncest help getting started
By johnnyrey in forum New Member IntroductionsReplies: 1Last Post: 02-07-2018, 07:40 AM -
eBay: CNC Router-GX-6060 - 600-600mm Bed. JQT High press Vacuu... (112398989888
By Malcolm in forum Items On eBay UKReplies: 3Last Post: 08-05-2017, 04:36 PM -
Centec 2A rebuild
By Web Goblin in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 02-04-2013, 08:41 PM
Bookmarks