granite plate & steel frame

[Chaz]

Look into DWH Diamant. Not cheap but perfect for this.

[JAZZCNC]

Look into DWH Diamant. Not cheap but perfect for this.

Also known as Moglice.

The Belzona product I use(which Clive linked too) is very similar in mechanical properties and is polymer-based epoxy metal. Just make sure you buy the release agent or you will never get it off the granite surface. First time I used it was on the surface of 100mm width rails and didn't use the release agent but instead decided to use 100mm wide pvc tape as a barrier between table and frame.
When came to remover the frame it was so well stuck it lifted the whole granite table which weighs aprox 1500Kg. Eventually got it off and worked fine but it was a battle, the second time with release agent was much easier and less hassle with no tape required.

[Chaz]

Also known as Moglice.

The Belzona product I use(which Clive linked too) is very similar in mechanical properties and is polymer-based epoxy metal. Just make sure you buy the release agent or you will never get it off the granite surface. First time I used it was on the surface of 100mm width rails and didn't use the release agent but instead decided to use 100mm wide pvc tape as a barrier between table and frame.
When came to remover the frame it was so well stuck it lifted the whole granite table which weighs aprox 1500Kg. Eventually got it off and worked fine but it was a battle, the second time with release agent was much easier and less hassle with no tape required.

Moglice is one of the products. The one I use is not Moglice.

What does the one you use cost Jazz?

[JAZZCNC]

What does the one you use cost Jazz?

Think the last price I paid was about £90 for 2Kg tub.