DDCSV tool change using Fusion 360

[Desertboy]

How do I do a manual toolchange and then set the height?

I think I need to add Manual NC before the toolpath


What does "Force manual tool change" do on the DDSCV?

What I would like is it to G28 and move it to a safe position
Release control so I can probe after toolchange to set Z.
Then press start to resume

How does it actually work?

I have it setup as a Fanuc, what other processors work in Fusion 360?

Thanks

[timtoo]

Hi Desertboy

Just joined to say hello to a fellow DDCSV user.
I have just got mine and still learning about it. I found two places to get help and info.
Facebook - love or hate it, some helpful people and the latest firmware updates are there https://www.facebook.com/groups/1724999967517167/

and
http://bbs.ddcnc.com/forum.php?mod=forumdisplay&fid=41

The developer/designer of the DDCSV was around on both forums until the Virus hit China.

I am setting up to use a 4th axis using the DDCSV on my my DIY CNC machine and have found that the Fanuc with A axis PP foe Fusion appears to work correctly.
I do not have it connected to the machine yet, but the numbers on the DRO look correct.

Tim