Thread: Xsy-at1 error 6 over current
Threaded View
-
20-02-2020 #1
I've done lots of searching but I can't seem to find and answer.
I'm running this vfd with a 1 1/2 blador motor for a 2x72 grinder, and I keep getting an error 6. I'm at a loss for what to change. Thanks for the help.
Here are the motor numbers
VOLTS 208 230/460
AMPS 5-4.6/2.3
RPM 3450
HZ 60
75 5 % P.F.
76 %
PH. 3
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help please - Leadshine EM806 over-current error
By Noplace in forum Motor Drivers & ControllersReplies: 3Last Post: 25-08-2015, 04:02 PM -
not enough current for relays?
By Boyan Silyavski in forum General ElectronicsReplies: 17Last Post: 17-08-2015, 10:05 AM -
VFD error
By routercnc in forum Spindles & Drive MotorsReplies: 37Last Post: 21-06-2014, 08:40 PM -
Current Set Resistors.
By NzOldun in forum Motor Drivers & ControllersReplies: 1Last Post: 20-06-2011, 08:38 AM -
G540 Current set resistors
By blueseidboy in forum Motor Drivers & ControllersReplies: 3Last Post: 23-08-2010, 02:21 PM
Bookmarks