Threaded View
-
23-02-2020 #1
Ok thought I'd make a short video because I've had lots of people ask me about these Servo's and when I've asked what controller they use most come back with one that is in 100Khz region which just won't cut the mustard for a 3000rpm servo with 10K encoder count unless we do a bit of trickery in the drive.
This video shows the trickery to get 100khz doing the job of 500khz and just how fu#king useless the Chinglish manual can be, which to be fair this chinglish manual is quite good.
Anyway hope it helps some of you. (LEE: We need a component section or if we have one and I've missed it please move.)
-
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
The 2.2Kw Chinese Spindles - Info, Setup and Advice + More
By Husky in forum Generic Chinese SpindlesReplies: 222Last Post: 22-01-2021, 06:54 PM -
Servo Manuals - Chinese Sellers
By Chaz in forum General ElectronicsReplies: 1Last Post: 30-04-2019, 12:12 PM -
Need a bit of help with servo settings/setup
By alboy in forum General DiscussionReplies: 1Last Post: 07-06-2018, 11:04 AM -
Rack & Pinion Gearbox/Gearing
By andrewbond in forum Rack & Pinion SystemsReplies: 21Last Post: 12-09-2015, 09:10 AM -
motor gearing (cog) help please
By martin54 in forum Linear & Rotary MotionReplies: 5Last Post: 06-07-2013, 11:48 PM
Bookmarks