HELP Please

[deepcut66]

That laser module is only about 5 watts i think, my laser cutter is the cheap Chinese K40, it runs on about 40 watts and cuts through 5mm acrylic at 5mm per second so a 5 watt laser isn't going to give you much cutting depth so only good for engraving, or it can of course cut more deeply with mutiple passes.

[blueallen]

40watts CO2 laser is not good at cut 5mm arylic,it is also not good to slow down the machine feedrate,i suggest that you can use normal feedrate instead of slow feedrate,but repeat this Gcode file more times.