Quote Originally Posted by JAZZCNC View Post
Never used DMM but I've heard good and bad things so who knows, you just have to try then make up your own mind.!

Ask fred about C5 because I've had C5 from him before and I think he even has or can get Ground screws in shorter lengths. Unless they have stopped supplying them.?

You have to stop at some point because you can go on for ever choosing better quality or performance parts, each upgrade usually affects some other area which then needs upgrading to match else it's pointless. The better machine isn't the one with a few high spec parts, the one that uses lower spec parts that are evenly matched will be the more balanced machine and overall usually work best. . . . Remember machine is only as good as it's weakest link, upgrade one area the rest becomes weak.!!
Can you specify some of the bad things? But, yes I will most lilely go for these anyway. Many have used them with great success. The manual and software is really good (not chinglish!) There must be bad things about the Delta servos also.

Fred can supply C5 ballscrews but it will be TBI brand and expensive (about 2.5x more expensive)!

This I have noticed, haha. I have saved every iteration of the machine design. I am up to v11 now..



Skickat från min SM-A530F via Tapatalk