-
05-03-2020 #1
Hi,
Before I get a company in China to make custom mill ends for carving PIR foam I just thought i'd ask here incase there was someone in UK or Europe who might have a faster turnaround.
I need R8, R6, R4 radius 4 flute HSS endmills @ 230mm long. One ballend and one flatend in each radius 16mm, 12mm and 8mm. The custom part is that R8 & R6 need to be turned down to fit a 10mm collet.
6 pieces in total.
Any links or suggestions most welcome
-
03-09-2020 #2
The last time I needed a custom part made I used these technical foam services. They helped me to draw up the part properly and prototyped it. See if they can help.
-
04-09-2020 #3
Might be worth contacting Drill Serice?? (www.drill-service.co.uk) - they did some custom cutters for a friend of mine.
-
09-09-2020 #4
In China they make and sell very cheap what you need.
Best will be to make / or buy/ custom shafts on lathe and insert there cheap HSS tools. That's what i do even for wood, long reach. Price wise unbeatable and also you could do that for each job very cheaply.
230mm 4mm tool is absurd.
-
14-09-2020 #5
I sourced from D12, D16 mill ends from Rico CNC who I bought from before. I'm not using a 4mm at 230mm anywhere, that would be absurd! My nearest equivalent would be an R1.5 taper ballend on a 200mm long 16mm OD extender, which works just fine.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
1.5mm Mill End Cutter Can Anyone Recommend a Supplier
By Ridgeback in forum Milling Machines, Builds & ConversionsReplies: 6Last Post: 25-01-2013, 12:53 AM -
Where to buy long ball nose mill for foam cutting?
By jamezwarner in forum Marketplace DiscussionReplies: 5Last Post: 10-05-2012, 02:03 PM -
CNC milling large foam bucks - DIY or supplier?
By cloudy in forum Marketplace DiscussionReplies: 0Last Post: 05-03-2012, 12:08 PM -
1.5mm ball end mill supplier in the uk
By luke11cnc in forum Marketplace DiscussionReplies: 9Last Post: 21-01-2012, 08:25 PM -
RFQ: Custom sized aluminium enclosure required
By benbenrf in forum Projects, Jobs & RequestsReplies: 8Last Post: 26-10-2009, 04:16 PM
Bookmarks