. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 24-10-2009 #1
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    hi irving
    i have the "steps per " in mach set to 533.3
    200 X 8 = 1600 divided by the screw pitch which is 3mm = 533.3
    maybe i am missing something here

    resolution seems good i drew a 300mm diam circle and measured it to exactly 300mm

    but the speed is very slow
    Reply With Quote Reply With Quote
  2. 24-10-2009 #2
    John S's Avatar
    Lives in Nottingham, England, United Kingdom.
    John S
    Last Activity: 23-09-2017 Has been a member for 9-10 years. Has a total post count of 2,073. Received thanks 140 times, giving thanks to others 45 times. Referred 1 members to the community.
    Are all the axis free? no binding ?
    John S -
    Reply With Quote Reply With Quote
  3. 24-10-2009 #3
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    yes john everything seems free without the screws attached light finger pressure will move them
    Reply With Quote Reply With Quote
  4. 24-10-2009 #4
    HiltonSteve's Avatar
    Lives in Derby, United Kingdom.
    HiltonSteve
    Last Activity: 20-04-2024 Has been a member for 9-10 years. Has a total post count of 334. Received thanks 15 times, giving thanks to others 1 times.
    It is the velocity and acceleration figures that adjust the speed, what are they set to?
    Reply With Quote Reply With Quote
  5. 24-10-2009 #5
    jonm's Avatar
    Location unknown.
    jonm
    Last Activity: 19-06-2011 Has been a member for 9-10 years. Has a total post count of 89.
    Click image for larger version.  Name: mach3.bmp  Views: 854  Size: 3.75 MB  ID: 1072hi
    i have tried various settings in here
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: mach3.jpg  Views: 526  Size: 63.1 KB  ID: 1073  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Need to slow down a signal due to Safe Torque Off alarm
    By corkcnc in forum General Electronics
    Replies: 0
    Last Post: 04-06-2014, 11:35 PM
  2. Machine Slow on Curves
    By swisscheese in forum Computer Software
    Replies: 31
    Last Post: 12-04-2014, 12:49 AM
  3. HSM Advisor - High Speed Machining feed & speed calculator
    By magicniner in forum CAD & CAM Software
    Replies: 2
    Last Post: 20-01-2014, 12:57 PM
  4. Help! Steppers losing steps and making a racket under slow feed..
    By fasteddy in forum Stepper & Servo Motors
    Replies: 23
    Last Post: 06-08-2011, 03:03 PM
  5. Forum Slow
    By pcstru in forum General Discussion
    Replies: 3
    Last Post: 27-01-2011, 03:54 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules