Thread: Cards for Astrosyn
-
04-11-2007 #1
Hi There,
Ok I am currently in the design phase of building a machine for my business to do alot of the drilling and edging work involved in the drums I make.
My question is I have some motors which are astrosyn 34 they are 3 v/phase 4 a/phase and 1.8deg per step
I am looking for some controller boards that dont cost the earth for these and I need it to be 4 axis I was wondering if anyone can recommend anything ?
I have seen these on ebay and have emailed the guy about them but do they look like they might work ?
http://http://cgi.ebay.co.uk/4-Axis-...QQcmdZViewItem
Anyway thanks for any help in advance :)
Francis
-
04-11-2007 #2
No these will not be suitable.
They are only 2.5 amp per phase and output a maximum of 19 volts.
Your type 34's will need about 48 volts at 4 amps to get reasonable performance.
John S.John S -
-
05-11-2007 #3
What ever you do, dont get them ! StepMasterNC have BAD feedback on these forums with delays and so on. The item on the link is also no good for your motors !
Your motors need a little somthing more like john said, so try this link: Click Here
Hope this helps, Motion Control Products is a good choice and also sell's the Power Supplies to go with there Drivers/Controllers. You could build your own PSU very easily and the cost will be about the same so the choice is yours really, just run everything your looking at via these forums and everyone will do there best to help you. :-)
Welcome to the forums !
CM.Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Moschip Semiconductor MCS9865 Printer Port Cards
By Mad Professor in forum Motor Drivers & ControllersReplies: 8Last Post: 11-05-2012, 04:46 PM -
FOR SALE: 4x Astrosyn MY103H702 Stepper Motors
By Mad Professor in forum Items For SaleReplies: 5Last Post: 16-04-2012, 06:25 PM -
DIY Driver Cards
By malik sohail in forum Electronic Project BuildingReplies: 3Last Post: 27-12-2009, 10:41 PM -
Astrosyn MY103H702
By rinderpest in forum Stepper & Servo MotorsReplies: 5Last Post: 07-06-2009, 05:36 PM -
DIY Driver Cards - pminmo.com
By Lee Roberts in forum Electronic Project BuildingReplies: 1Last Post: 31-08-2008, 01:01 AM
Bookmarks