Cutting Wood veneer

[Adrian_S]

Try something like dopping wax or sealing wax to hold the veneer down to a waste-board, then after cutting, use a hot-air gun to soften the wax.

[Britannicus1]

Try something like dopping wax or sealing wax to hold the veneer down to a waste-board, then after cutting, use a hot-air gun to soften the wax.

That might work - going to wax it all in the end anyway - going to try the tape thing one more time too

[the great waldo]

hi Britannicus

Watch out that you don't cut too deep past the veneer as the only problem I envisage is the tape rucking up the cutter, I thank thats going to depend on what kind of cutter your using. I think in this case a downcut cutter would work best.
Cheers
Andrew