. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-01-2022 #14
    Colin Barron's Avatar
    Lives in durham, United Kingdom.
    Colin Barron
    Last Activity: 27-03-2025 Has been a member for 9-10 years. Has a total post count of 149. Received thanks 4 times, giving thanks to others 18 times.
    Setting SZGH-CNC1000TDb slide movements.
    In the case of my SZGH CNC1000TDb it uses: set P16 on User parameters,diameter or radius programming.
    The stepper pulses need to be matched at 10,000 on the stepper drive and in Axis Parameter No.17 Numerator of X Electron gear also set to 10,000.
    I will set the No18 moved distance in diameter (P16) and see if that is correct.

    The F1 user set p16 was default (0) diameter programming, so cross slide movement should be half readout.
    Last edited by Colin Barron; 10-01-2022 at 12:19 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese mini cnc 2030 USB Controller MK1
    By sairfan1 in forum Chinese Machines
    Replies: 6
    Last Post: 21-12-2018, 12:50 AM
  2. Chinese rs1313 with dsp controller
    By Wilsonsigns in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 24-03-2015, 08:44 PM
  3. Revised G-Code Quick-Reference / Cheat Sheet
    By DanielF in forum Machine Control Software
    Replies: 2
    Last Post: 20-02-2014, 11:14 AM
  4. Cheap chinese USB controller.
    By mocha in forum Marketplace Discussion
    Replies: 0
    Last Post: 14-12-2012, 05:50 PM
  5. Lathe controller
    By Davidh in forum Milling Machines, Builds & Conversions
    Replies: 1
    Last Post: 25-12-2009, 12:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules