Puruvesi MyCNC-ET7 Controller first look.

[JAZZCNC]

You just push against the din rail and the opposite side of the spring flips out of the din rail.

Are you using windows10 or 7.? If so did you have any trouble getting them to connect.? And is it stable.? I still havent got it to work with win10 and it's not stable on win 7.!!

[Neale]

You just push against the din rail and the opposite side of the spring flips out of the din rail.

Another statement of the bleeding obvious that I totally failed to see. Unfortunately, it wouldn't have worked for me due to the fact that I mounted the IP/M box and its terminal adaptors so close that I couldn't remove either of them as they were hard up against each other. Do you think that one day I shall learn from my own experience? Seems unlikely, though...

Haven't yet tried the thing as I don't have a spare 24V supply and if all else fails I can restore the IP/M without too much effort. Fingers crossed, another mug of strong coffee, and back to the wiring.

[JAZZCNC]

Unfortunately, it wouldn't have worked for me due to the fact that I mounted the IP/M box and its terminal adaptors so close that I couldn't remove either of them as they were hard up against each other. Do you think that one day I shall learn from my own experience?

Neale I'd like to say "YOU MUPPET" but that would be hypocritical of me because I've lost count of how many I've fitted and I still put the bloody terminal adaptors too close together trying to max out space and can't get the buggers off again...Lol