looking for ideas to build 5 axis mill turn machine

[m_c]

Suppose it's all down to what machines you have to help with the machining.?

A mill with a 40"x10" table, with ~27"x~15" travel, provided I actually get it working.
I just need two more servos and drives, and I think I've got all the major bits needed to get it functional, but I've got a few other projects I want to get finished first.

[JAZZCNC]

A mill with a 40"x10" table, with ~27"x~15" travel, provided I actually get it working.
I just need two more servos and drives, and I think I've got all the major bits needed to get it functional, but I've got a few other projects I want to get finished first.

Ye I'm in a similar position I've got the Semco with 1100mm x 450mm travel, the beds about 1250 x 400 I think. Also Fadal VMC with 500 x 400 travel with bed around 650 x 400.
Fadal is closest to working just sat waiting for motors and controller but the Semco only needs rebuilding and electronics. But with the current state of things and not being able to work then both will be on the back boiler for a good while.!