Losing steps/position, again

[ngwagwa]

If you want to go with series wiring then look for 2 x 20V 500Va. This will give aprox 55Vdc

I guess with 55Vdc I will hve to go with 80V controller then (the next one donw being 50V)?
https://www.cnc4you.co.uk/Microstepp...tepping-CW8060

[JAZZCNC]

I guess with 55Vdc I will hve to go with 80V controller then (the next one donw being 50V)?
https://www.cnc4you.co.uk/Microstepp...tepping-CW8060

Yes or if you want to use with 50V drives then size transformer accordingly. Just remember you need to leave a 10% safety margin so don't size transformer to give 50V or even 48V.