I am not trying to cut the wood and the foil material at the same time nor even within the same day. We just have some other products that we make that if we are going to have to use a CNC to cut the foil material, we can make the other products on it as well.

Have no problem manually changing the heads out, based upon what we are cutting that day.

It will need to cut upto 1/2" MDF, 1/4" and 1/8" ABS plastic, and then the foil material.

As far as dust collection system, we already have that in place on our table saw and router table.

I would be more then happy to send someone a sample piece of the foil material. The material we are using is ProDex Insulation. It is fairly ridged, but still has a flexible property to it. More info on it can be found here:

http://www.insulation4less.com/Insul...nsulation.aspx

The Pen / Sharpie is not critical, just trying to keep the guys from having to hand label that parts after being cut. But push come to shove we can still do that if need be.