N0VUSUN and Mitsubishi-D700-SC

[JAZZCNC]

Hi JAZZCNC
thanks for your reply,
Ok well you have the Nvem S-axis wired up so were are you running those wires.?

Nvem S-Axis out1 Orange and White twisted pr goes to STF on the VFD
Nvem S-Axis out2 Green and White twisted pr goes to STR on the VFD
The other two twisted pairs blue and white,brown and white have not been connected as yet but looks like terminal 5 and 2 after reading your reply

S-axis /Gnd1 goes to terminal 5 on Vfd which is Analog Gdn
S-axis/VSO goes to terminal 2 on VFD which is 0-10V.

Read my edited reply.