Cnc Machine wanted

[JAZZCNC]

Hi Franky,

Slightly larger than you want and not ready for sale yet but if I ever get back into work then hopefully in not too distant future I'll have a Fadal 15 VMC for sale. It's very tidy linear rail machine which hasn't had a hard life, only cut brass most of it's life. (Been in storage for last 5yrs before I bought it)

It will be fully retro fitted with a modern industrial controller and AC brushless Servos. It's got 16 tool ATC (carousel type) 7.5Kw BT40 7500Rpm spindle, Travels are X500 Y400 Z400. There is a 4th axis that goes with it but that won't be part of the retrofit and sale as it's not a simple affair to incorporate it into the system and will add a lot of work to the retro fit . So will be sold separately, probably to someone with an original Fadal Controller. (Unless someone shows interest and makes it worth the work before the retro fit starts then I might consider fitting it.)

If this interests you and your not in rush get in touch.

See it here in all it's stripped down glory and my thoughts on how I'm going to do it and why I'm doing it.

http://www.mycncuk.com/threads/13236...-live-again%21