Thread: TOS-KURIM CNC Upgrade
Hybrid View
-
15-04-2020 #1
Can't answer that without knowing more about the motors and the drives.
They are probably DC Brushed motors and It's quite possible you can get away without drives but it will probably require a different controller that uses +/-10V analog signals and these get expensive quick and are not so popular as Step/Dir controllers. You can get DC Brushed drives which accept Step/Dir signals but they are often not cheap.
It's often cheaper and better to just replace them as a set with modern AC motors and use a Step/Dir controller.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
eMachineShop Upgrade
By Bladevane in forum CAD & CAM SoftwareReplies: 176Last Post: 23-06-2024, 12:03 PM -
PC Upgrade Options?
By Chaz in forum General DiscussionReplies: 11Last Post: 31-08-2016, 04:53 PM -
Laser Upgrade
By dcrowder in forum Laser Machines & BuildingReplies: 8Last Post: 06-05-2016, 01:06 PM -
VFD upgrade
By paulus.v in forum Spindles & Drive MotorsReplies: 11Last Post: 05-11-2014, 11:09 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM
Bookmarks