looking for help to purchase a cnc router

[warriors01]

hi there all

I am Gary from London just would like to introduce myself.

I would like to get into the home hobby of cnc routering and possibly start making some interesting stuff and maybe after once I have learned enough making a little side line business with it so joined this forum to get some advise on purchasing a 1000 x 1000 router with
a water cooled spindle.

been looking around over the last couple of months and to be honest having a bit of trouble finding one that I can get through my house and into my man shed access is very limited due to no back garden access so have to bring everything through the house.

Also trying to find a machine that is of good build and spec I am looking for one either pre built or one partially built or last resort one I have to put together.

I have looked at the shapeopo and workbee versions any comment's on either of them good or bad would help me very much.

but I also need to to source a water cooled spindle kit to fit either of the two mentioned above any help with this would also be very helpful,

my budget would be around 2-3k all in

so I am hoping for fellow forum peeps to help me out a lot

just wanted to say thanks in advance.

regards.
Gary