Thread: Lathe Reverse
Threaded View
-
03-05-2020 #30
Last Activity: 13 Hours Ago
I just had another quick search, and this came up - http://www.sentridge.com/wp-content/...wiring_1ph.pdf
It's not exactly like your wiring, however it should point you in the right direction, provided you work out how your coils are connected to your terminals.
I'm a bit tired, but I think your main coil will be connected diagonally (middle left, to top right in your diagram), with one end of the secondary coil bottom right, and the other top left.
If you remove all the jumpers, a quick test with a mutlimeter should confirm/reject that.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
The Following User Says Thank You to m_c For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Replaced faulty driver, now that axis runs in reverse
By WRandall in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-10-2018, 07:42 AM -
Dumb Reverse
By Leadhead in forum General DiscussionReplies: 3Last Post: 03-10-2016, 12:41 PM -
Reverse engineering
By mikewatch in forum Probing, Digitizing & ScaningReplies: 1Last Post: 13-04-2013, 10:20 PM -
CNC style lathe home brew Lathe for drilling and cutting.
By Bodge in forum Lathes, Lathe Rebuilding & ConversionsReplies: 9Last Post: 18-04-2012, 10:45 AM
Bookmarks