Thread: Help with tb6600 stepper driver
Threaded View
-
30-04-2020 #3
Last Activity: 10-09-2024
Hi Doddy, I wired as you said and it does move only one step then the motor starts screaming, I tried stopping the CLK & CW wires over but didn’t work, I don’t know if I have the dip switch’s set correctly.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Connecting UNO R3 AVR Module / Arduino CNC Shield to TB6600 for Nema23 stepper motors
By DaveZ in forum Control Hardware & SystemsReplies: 11Last Post: 14-09-2021, 09:33 AM -
WANTED: Conqueror Design stepper driver or stepper conversion board
By pistolknight in forum Items WantedReplies: 1Last Post: 25-05-2019, 11:57 AM -
Csmio-IPM wiring A nema 17 TB6600 driver Z axis THC
By Copypaste in forum CS-Lab (CSMIO)Replies: 0Last Post: 14-02-2019, 08:41 PM -
TB6600 + general drive and driver matching question
By CNCStudent in forum Motor Drivers & ControllersReplies: 17Last Post: 29-12-2014, 10:16 AM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM
Bookmarks