Thread: RFQ: Vintage Camera Parts
Hybrid View
-
28-10-2009 #1
Hi,
I'm also looking for a CNC service to make some vintage camera parts for me. I'm imagining that there should be a service out there, but several hours on the web hasn't turned up much except for eMachineShop.
BTW I did find CNC for motorcycle parts (see below).
Regards,
Alan
http://www.themuttznutz.com/
http://radicalcustommotorcycleparts.com/
http://www.cjs-engineering.co.uk/
-
28-10-2009 #2
I should say that the service would ideally take a supplied cad file rather than drawings.
Alan
-
29-10-2009 #3
Do you have any drawings or photo's of the type of parts that you are after, anything to give us an idea will do for now.
-
30-10-2009 #4
OK a dxf and some slightly dodgy jpgs. Of course being vintage, the tolerances are not bothersome +-0.5mm should be fine.
Alan
-
30-10-2009 #5
1.39 metres ?
Is this for Jodrell Bank?
.John S -
-
02-11-2009 #6
139mm x 4mm although I like the sound of 4cm aluminium a lot :)
Alan
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
First couple of parts...
By Wal in forum Metalwork Project ShowcaseReplies: 10Last Post: 14-02-2014, 03:41 PM -
NEW MEMBER: CNC Router Parts
By CRP in forum New Member IntroductionsReplies: 4Last Post: 29-10-2013, 02:37 AM -
RFQ: Simple job cutting simple shapes out of camera lens cap
By RockandGrohl in forum Projects, Jobs & RequestsReplies: 15Last Post: 20-04-2013, 01:23 AM -
RFQ: Some parts.
By jcb121 in forum Projects, Jobs & RequestsReplies: 8Last Post: 22-03-2012, 05:07 PM -
Digi camera measuring lens threads?
By graffian in forum General DiscussionReplies: 9Last Post: 21-10-2010, 02:23 PM
Bookmarks