Thread: Possible Fixed Gantry build
-
05-05-2020 #1
Well looks like i might be building another machine. My "big" machine is sold and i am able to buy back my 6040 in the interim.
This time i am thinking Fixed gantry, but i would like to again use an aluminium frame.
Any advise/ideas would be greatly appreciated :)
...looking at work area of approx 600 W x 400
Thanks
Erick
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Steel framed fixed gantry draw slide build super cheap
By Steel in forum DIY Router Build LogsReplies: 55Last Post: 17-05-2017, 06:15 PM -
Small Fixed Gantry Router Spec and Build
By shaunrod in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 29-07-2016, 06:55 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
BUILD LOG: New build - fixed gantry mill using extruded profile
By toolchimp in forum DIY Router Build LogsReplies: 3Last Post: 09-11-2012, 04:10 PM -
BUILD LOG: Fixed Gantry Router
By lateAtNight in forum DIY Router Build LogsReplies: 24Last Post: 28-05-2009, 11:30 PM
Bookmarks