Thread: Plasma cutting using hf start
-
10-05-2020 #1
Hi all,
I'm new to all things cnc but have always wanted a cnc plasma cutter so I decided to build one. It's only a X and Y axis machine very simple in design running a USB6560AXIS4 board with usb cnc software all of which is working well but my issue is my plasma cutter. I didn't do enough research and have only just found out it's very hard to get a hf start plasma cutter to work with cnc equipment. As soon as the plasma cutter fires up it plays havoc with the laptop and stops the gcode.
I was wondering if it would be possible to make some sort of faraday box around the plasma cutter to stop the hf or is it also coming from the torch?
Now I still haven't finished my machine and the board and power supply aren't enclosed and are just on a work bench next to my plasma cutter (I know this doesn't help). I have used shield cable to my stepper motors luckily. My plan for the board and power supply are to put them in a metal box to try shield them also adding ferrite bead to the cables entering the enclosure.
Sent from my SM-G950F using Tapatalk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
HF start plasma and CNC...
By Davek0974 in forum Plasma Table MachinesReplies: 12Last Post: 04-06-2020, 11:57 PM -
Plasma Cutting and Setup - talk to me!
By andy_con in forum Plasma Table MachinesReplies: 2Last Post: 06-09-2018, 03:59 PM -
Plasma cutting - confined space
By Dangle_kt in forum Plasma Table MachinesReplies: 6Last Post: 30-12-2016, 11:40 AM -
Hypertherm Plasma Cutting Systems
By Hypertherm John in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 04-03-2011, 02:46 PM -
Plasma - Big Problems - HF Start !!!
By jamied in forum Machine DiscussionReplies: 10Last Post: 22-09-2010, 12:27 AM
Bookmarks