Router bit not milling full depth

[paulus.v]

I have the 2010 screenset and I'm very happy with it. I never switched back to the ugly Mach3 default design again :)

I find convenient the Tool Change tab. For each job I set the Material Offset to the material thickness and use the touchprobe on the table. This way I never cut through my spoilboard and the Z0 is automatically set to the upper face of my material. And the XY probing wizard is great as well.

[cropwell]

I have the 2010 screenset and I'm very happy with it. I never switched back to the ugly Mach3 default design again :)

I find convenient the Tool Change tab. For each job I set the Material Offset to the material thickness and use the touchprobe on the table. This way I never cut through my spoilboard and the Z0 is automatically set to the upper face of my material. And the XY probing wizard is great as well.

I bought it as well (a while ago), I have not yet installed it. I have too much going on at the moment to take on any more change, but you are making me feel guilty