Thread: SimCNC- any users?
Threaded View
-
15-05-2020 #1
Is anyone here running a csmio based machine with SimCNC?
About to start a Denford Triac ATC retrofit, it came with an abandoned csmio ip/a retrofit so I’ve already got the control and i/o boards. I’m toying with the idea of retaining the csm for closed loop but won’t go Mach, however I’m also being pulled towards either-
uccnc.. I’ve also got a uc300eth+ub1 and a mate has done the exact same machine with uc so with the requisite number of drinks and a chinese meal I could probably nick his config which means lots less work figuring out the atc
Acorn- I’ve just done a Denford Orac ATC lathe conversion with acorn, I found it really easy to set up and I like their wireless pendant. Having the same UI on both machines would be a bonus.
A choice between the two open loop options is my call but I was wondering whether anyone here has done enough real-world hours on simCNC to recommend it?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Any Turbocad users here?
By Desertboy in forum CAD & CAM SoftwareReplies: 7Last Post: 29-09-2017, 12:13 PM -
Probe-it / any users ?
By dudz in forum CAD & CAM SoftwareReplies: 8Last Post: 02-11-2015, 11:51 PM -
Do we have any SolidWorks users here?
By Mad Professor in forum SolidworksReplies: 17Last Post: 31-12-2012, 08:35 PM -
How many LinuxCNC/EMC users do we have?
By birchy in forum LinuxCNC (EMC)Replies: 16Last Post: 30-12-2012, 08:08 PM -
Draftsight users
By boldford in forum CAD & CAM SoftwareReplies: 1Last Post: 24-07-2012, 03:25 PM
Bookmarks