Converion based upon my old Deckel Mill

[John11668]

Had a play today and managed to do a rudimentary drawing (keeping it simple ) Managed to create a toolpath and a bunch of G code on my office machine .
Then tried to email the Gcode to my workshop machine so i could try it out on Mach 3 .
What is the process. I can save a *.cd file . but cant seem to attach it to an email.
Cant copy and paste cos the code is tens of pages and i cant copy all at one go. What is the best way to send a Gcode file to another machine ?

Are there off the peg bits of code to play with while I am getting the hang of Bam Bam?

[driftspin]

Had a play today and managed to do a rudimentary drawing (keeping it simple ) Managed to create a toolpath and a bunch of G code on my office machine .
Then tried to email the Gcode to my workshop machine so i could try it out on Mach 3 .
What is the process. I can save a *.cd file . but cant seem to attach it to an email.
Cant copy and paste cos the code is tens of pages and i cant copy all at one go. What is the best way to send a Gcode file to another machine ?

Are there off the peg bits of code to play with while I am getting the hang of Bam Bam?

Hi john,

Try rightclick zip and email.

When it is still over 10mb orso zipped.
Just copy it to an usb stick.

Walk it to the machine.


Grtz Bert.


Verstuurd vanaf mijn SM-A505FN met Tapatalk