Quote Originally Posted by Tom View Post
Hi Irving,

That snubber circuit is very interesting... It's just what I need. I'm running one of those 50V power supplies that Kip found in "unregulated" mode at 43V. My drivers will smoke at 50V, so I'm nervous.
Can you point me towards any online material that would help size the components to dissipate the sort of spikes I'm likely to see?

Sorry to hijack! (maybe Irving's tip will save a few more driver boards... :)

Tom
Tom,

Yes, sadly I wasnt able to find an easy way to turn the volts on those down as they do some strange things with the internal reference line that doesn't follow the application note for the chip they use. I managed to blow one up quite spectacularly!

When I said zener diode I really meant a transient suppressor diode (transorb), such as these from Vishay. But i think clamping to 50v from a 43v supply might be tricky. A zener will clamp, but wont catch transients. you could use a 47v zener as a clamp with a 48v transorb in parallel to catch spikes, with a series low ohm resistor as a current limit between the supply rails. Farnell sell the transorbs, about 30p a go.