Quote Originally Posted by cleansurf2 View Post
I've received my TB6560 and started bench testing for a 4 axis hotwire configuration. Looking at using Mach3 + Profili2 for the G-code.
I'm using Axis X, Y, Z, A, running Mach3 v3.042.
Problem is that two of the axis are really slow. I have swapped around the motors to prove there OK. So the problem is likely Mach3 config.
Mach3 was more complex than I expected, so far can't find the configuration problem (I''m an electronics Tech).

Anyone offer any advice or a config file to help out.

thanks
Rick
Rick,

Define 'slow' .. do you mean they dont rotate at the same speed as the other channels with the same settings? I assume you've been through the 'motor tuning' process in the Mach3 tutorial?