Well the post and been and gone today, but no sign of my parcel yet.

Oh well it looks like I will not get unto next week now.

I have been reading the so called bad english manual for the driver board to work out what DIP Switch settings I am going to need.

I am only intrested in switches 1-4.

Switches 1-2 are for the current setting, 100%, 75%, 50%, 25%.

Is this a case of 3.00amps, 2.25amps, 1.50amps, 0.70amps, or does the board self sence the current and when at idle or hold, hold the current at said % of the stepper motors max current.

Next is Switchts 3-4 for the Buffer, the manual just has, Fast, 25%, 50%, Slow, so at a guess I need to set it to Fast.

Then the last two switches 5-6 are for the step modes, this I understand.