Thread: Vertical bandsaw
-
15-09-2020 #11
With care, it seems that you can use woodworking power tools for aluminium. Certainly folks on this forum have used handheld routers to work Al. I've used my workworking bandsaw for Al as well - was a bit worried at first but take it easy with a suitable blade and it works OK.
-
The Following User Says Thank You to Neale For This Useful Post:
-
15-09-2020 #12
-
15-09-2020 #13
The old Sealey is intended for both and has speed change pulleys . Works superbly on 3,5, 6, and 8 mm plate . Havent tried on 10 yet but I would tend to buy that as slab and use the 6x4 for that.
Has anyone found it puzzling how to get the teeth to cut downward on some saws
-
16-09-2020 #14
I've got one of these primarily for wood but I have cut 12mm aluminium with it using the ordinary wood blade and was happy with the results. A dedicated metal blade would obviously be better and it does have pulleys for two speeds.
Obviously this particular machine would incur significant delivery costs for you but there must be a Pommie equivalent available.
https://www.machineryhouse.com.au/W952An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
16-09-2020 #15
Mine has actually cut chinese glass scales down to size
(but that probably would not be covered by the instructions)
-
17-09-2020 #16
I have a Proxxon bandsaw that I use for model engineering. I do not use aluminium but I have used the Proxxon to cut 1/2" brass and mild steel flat bar. I have the blades made locally with 14TPI but the company would make them with any standard number of teeth. I use bimetal blades.
Brian
-
17-09-2020 #17
I bought an old 14" Startrite for £130, it has 5 pulley speeds and a two speed gearbox, so 10 in total. It's a heavy thing which pays when cutting aluminium and steel. I've re-sawn ash and oak up to 11" thick, very slowly.
Only downside is that it needs an inverter as it's 3 phase.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Metal Bandsaw or Cut-Off Saw?
By Gytis in forum Metalwork DiscussionReplies: 25Last Post: 18-01-2017, 08:36 PM -
Wiring a Bandsaw to VFD ? Speed?
By Boyan Silyavski in forum Motor Drivers & ControllersReplies: 1Last Post: 18-08-2016, 11:53 AM -
Bandsaw Guides
By PeteG in forum Marketplace DiscussionReplies: 6Last Post: 17-10-2015, 02:38 PM -
Affordable bandsaw that's not cr@p
By garson626 in forum Tool & Tooling TechnologyReplies: 4Last Post: 13-02-2014, 12:16 AM -
Multico Bandsaw
By newtoid1986 in forum Marketplace DiscussionReplies: 0Last Post: 13-04-2012, 09:17 PM
Bookmarks