Thread: Everything works in reverse
Threaded View
-
15-06-2020 #1
My family has bought me a cnc3018, I can manually Move the spindle up, down, left right, backwards and forwards no problem, I can zero the axis but as soon as I try to run a test piece, everything goes haywire, when the blade should be in the air it is in the wood and visa versa, instead of starting in the bottom left it jumps to the top right. The cuts then start going from right to left instead of left to right., hope someone can help
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Lathe Reverse
By blackburn mark in forum Motor Drivers & ControllersReplies: 34Last Post: 04-05-2020, 06:20 PM -
Replaced faulty driver, now that axis runs in reverse
By WRandall in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-10-2018, 07:42 AM -
Dumb Reverse
By Leadhead in forum General DiscussionReplies: 3Last Post: 03-10-2016, 12:41 PM -
Reverse engineering
By mikewatch in forum Probing, Digitizing & ScaningReplies: 1Last Post: 13-04-2013, 10:20 PM -
My CNC WORKS...
By emboss.shop in forum Metalwork Project ShowcaseReplies: 0Last Post: 30-09-2009, 06:04 PM
Bookmarks