Hi From Ballycastle

[joey]

Have a read through this https://forum.linuxcnc.org/plasmac .


https://forum.linuxcnc.org/plasmac/3...-documentation

Also this is the easy way to get linuxcnc

https://forum.linuxcnc.org/9-install...int-iso#165631

This is the above in action; https://www.youtube.com/watch?v=d0s6sI7IvuY

download the iso and use windisk to make a boot usb

https://eusurplus.com/index.php?rout...&product_id=50 is this the board i require?