Confused again!

[Buba b]

I changed the 2-29 to 80 and the Num / Denom to 1/1 and no change still out but I'm going to have a look when I've got time at the weekend .
So just for interest I found a blog with a guy setting up a Newker control , cant believe it much different and he's setting up a 4th axis with a stepper motor

https://mightyshiz.blogspot.com/2018...ewker-cnc.html

He says :

"The units are important too. I have 2000 steps per turn set up on the stepper driver and the controller seems to generate 4 pulses per "step", so I need 8000 on the numerator and 1900 on the denominator (# in "axis" parameters). Not clear quite how all that works but certainly, the indicated units for the A axis correspond with degrees movement on the table."

Now i haven't got into reading too much yet but it was interesting that he's got the big numbers in numerator and denominator rather than the 1/1 .
So I'm going to bash google as I cant be the only muppet running one of these with steppers ......or can I .....hmmm!
Thanks

Some guy called Muzzer ?? .....now where have I seen that name before !