. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-07-2020 #4
    Kitwn's Avatar
    Lives in Don, Tasmania, Australia.
    Kitwn
    Last Activity: 15-07-2024 Has been a member for 7-8 years. Has a total post count of 983. Received thanks 118 times, giving thanks to others 52 times.
    I'm not familiar with Mach3 so cannot offer help there. One test would be to change the postprocessor in CamBam to the 'generic' option and see if that makes a difference. It might at least help point to where the issue is.

    Have you looked on the CamBam forum? It's a very active universe and there will be plenty of people with CamBam/Mach3 experience.

    EDIT: Just had a look and this might help...
    https://cambamcnc.com/forum/index.ph...65142#msg65142

    Kit
    Last edited by Kitwn; 08-07-2020 at 01:32 AM.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cambam with Mach3
    By ladybreaker in forum General Discussion
    Replies: 13
    Last Post: 26-02-2017, 05:56 PM
  2. Mach3 / cambam
    By dudz in forum Artsoft Mach (3 & 4)
    Replies: 5
    Last Post: 01-04-2013, 06:02 PM
  3. Cambam / milling Alu
    By dudz in forum CAD & CAM Software
    Replies: 5
    Last Post: 23-12-2012, 05:22 PM
  4. Drilling Acrylic with CamBam
    By m.marino in forum Machine Discussion
    Replies: 2
    Last Post: 06-06-2012, 04:45 PM
  5. How do i make this in cambam?
    By motoxy in forum CAD & CAM Software
    Replies: 4
    Last Post: 09-02-2012, 06:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules