. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-07-2020 #24
    Bernard's Avatar
    Lives in Thornbury, Australia.
    Bernard
    Last Activity: 20-07-2020 Has been a member for 4-5 years. Has a total post count of 21.
    Click image for larger version.  Name: IMG_8766-1.jpg  Views: 1236  Size: 160.0 KB  ID: 28585Click image for larger version.  Name: IMG_8769-1.jpg  Views: 1243  Size: 141.9 KB  ID: 28586Click image for larger version.  Name: IMG_8770-1.jpg  Views: 1263  Size: 208.7 KB  ID: 28587Click image for larger version.  Name: IMG_8771-1.jpg  Views: 1284  Size: 245.2 KB  ID: 28588Click image for larger version.  Name: IMG_8772-1.jpg  Views: 1247  Size: 205.2 KB  ID: 28589Click image for larger version.  Name: IMG_8773-1.jpg  Views: 1234  Size: 110.5 KB  ID: 28590Click image for larger version.  Name: IMG_8767-1.jpg  Views: 1263  Size: 1.24 MB  ID: 28591

    Hi Jazz, here are the pics of the inside of the controller. Please check to see if the spindle card is there. Don't have a clue what it looks like

    As the spindle is 220v (which is stated on top of spindle), can we connect 220v direct to the spindle externally, bi-passing the control box, with a separate speed controller. I can then power the spindle before cutting, independent of Mach 3 controls of the spindle. Cheers, Bernard

    Click image for larger version.  Name: IMG_8766-1.jpg  Views: 1236  Size: 160.0 KB  ID: 28585Click image for larger version.  Name: IMG_8773-1.jpg  Views: 1234  Size: 110.5 KB  ID: 28590Click image for larger version.  Name: IMG_8774[1]-1.jpg  Views: 1271  Size: 126.4 KB  ID: 28592Click image for larger version.  Name: IMG_8777[1]-1.jpg  Views: 1248  Size: 157.5 KB  ID: 28593Click image for larger version.  Name: IMG_8781[1]-1.jpg  Views: 1269  Size: 1.15 MB  ID: 28594

    Hi Jazz, more pics. Spindle is AC 220v. From pic it has four pins. Can I do what I suggested above, to by pass the controller and power the spindle with 220v AC?
    The manual switch on the controller box will not power the spindle

    Another picture of internal wiring to the spindle connector outside the box

    Click image for larger version.  Name: IMG_8776[1]-1.jpg  Views: 1246  Size: 117.1 KB  ID: 28595

    Hi Jazz, here is the link to the 'User guide for CNC 3040. Hope this will help. I followed this guide.
    https://www.china-cncrouter.com//dow...7282452561.pdf
    Last edited by Bernard; 16-07-2020 at 11:42 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Connect spindle to mach
    By Duffman in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 14-07-2020, 06:08 AM
  2. Spindle won't run using mach 3
    By ryanjgreen in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 20-10-2019, 06:44 PM
  3. Spindle not spinning and got warm to touch
    By Palletlad in forum General Electronics
    Replies: 3
    Last Post: 29-06-2019, 06:47 PM
  4. CNC 3040T-DJ Router spindle won't stop spinning
    By Chilli in forum Chinese Machines
    Replies: 5
    Last Post: 19-11-2016, 01:33 AM
  5. Problem with Spindle not spinning
    By Noplace in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 22-01-2016, 02:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules