. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-07-2020 #8
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Bernard View Post
    Hi all. I'm a new member and have just purchased a Chinese CNC 6040. Managed to do a Gcode file and got it into Mach 3. All the 3 axis are working well but the spindle is not spinning. Can someone help me. I think there is something that I did wrong in the "Config" in Mach 3. I am a novice in CNC and this is my first attempt at using one. I am into wood working as a hobby and trying to make wooden clocks. I can make them doing manual cutting with scroll saw and band saw. But that is not as accurate as using a CNC machine and it takes a lot of time and effort. Thanks for any help that is offered
    To help we need more info on your settings and what exactly you have, these Chinese machines are like eating a box of chocolates in the dark.!!
    Take some screen shots of your settings and will take a look.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Connect spindle to mach
    By Duffman in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 14-07-2020, 06:08 AM
  2. Spindle won't run using mach 3
    By ryanjgreen in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 20-10-2019, 06:44 PM
  3. Spindle not spinning and got warm to touch
    By Palletlad in forum General Electronics
    Replies: 3
    Last Post: 29-06-2019, 06:47 PM
  4. CNC 3040T-DJ Router spindle won't stop spinning
    By Chilli in forum Chinese Machines
    Replies: 5
    Last Post: 19-11-2016, 01:33 AM
  5. Problem with Spindle not spinning
    By Noplace in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 22-01-2016, 02:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules