. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 15-07-2020 #1
    Bernard's Avatar
    Lives in Thornbury, Australia.
    Bernard
    Last Activity: 20-07-2020 Has been a member for 4-5 years. Has a total post count of 21.
    Click image for larger version.  Name: IMG_8750-1.jpg  Views: 1352  Size: 958.9 KB  ID: 28574Click image for larger version.  Name: IMG_8750-1.jpg  Views: 1352  Size: 958.9 KB  ID: 28574Click image for larger version.  Name: IMG_8751-1.jpg  Views: 1334  Size: 988.4 KB  ID: 28575Click image for larger version.  Name: IMG_8752-1.jpg  Views: 1359  Size: 1.69 MB  ID: 28576Click image for larger version.  Name: IMG_8753-1.jpg  Views: 1360  Size: 1.71 MB  ID: 28577Click image for larger version.  Name: IMG_8754-1.jpg  Views: 1357  Size: 1.78 MB  ID: 28578Click image for larger version.  Name: IMG_8755-1.jpg  Views: 1298  Size: 1.81 MB  ID: 28579Click image for larger version.  Name: IMG_8756-1.jpg  Views: 1343  Size: 1.72 MB  ID: 28580Click image for larger version.  Name: IMG_8757-1.jpg  Views: 1322  Size: 1.79 MB  ID: 28581Click image for larger version.  Name: IMG_8758-1.jpg  Views: 1345  Size: 1.80 MB  ID: 28582Click image for larger version.  Name: IMG_8759-1.jpg  Views: 1337  Size: 1.82 MB  ID: 28583Click image for larger version.  Name: IMG_8760-1.jpg  Views: 1341  Size: 1.25 MB  ID: 28584

    Here are the attachments. Hope it come thru ok! Thanks
    Reply With Quote Reply With Quote
  2. 15-07-2020 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Hi Bernard, Ok well, to be honest, and as expected, I've got a feeling this controller can not control the spindle speed from mach3. For Mach3 to control the spindle speed then it must have a spindle card installed or the breakout board which can provide a speed reference voltage. However to be sure we will need to look inside the controller at the boards to see what you have. So if you can take the lid off and get some good pics it will help.

    However, even if it doesn't have speed reference voltage it's still possible to control the ON/OFF from Mach3 which is still very handy.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Connect spindle to mach
    By Duffman in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 14-07-2020, 06:08 AM
  2. Spindle won't run using mach 3
    By ryanjgreen in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 20-10-2019, 06:44 PM
  3. Spindle not spinning and got warm to touch
    By Palletlad in forum General Electronics
    Replies: 3
    Last Post: 29-06-2019, 06:47 PM
  4. CNC 3040T-DJ Router spindle won't stop spinning
    By Chilli in forum Chinese Machines
    Replies: 5
    Last Post: 19-11-2016, 01:33 AM
  5. Problem with Spindle not spinning
    By Noplace in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 22-01-2016, 02:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules