Hi Guys,

Quick update, Seems there is contactor that doesn't appear to be working. (contactor D1L 0052)

I have been tracing wires all afternoon and trying to find where each one goes, trying to build up a picture of what goes where and how it is connected as an "decent" wiring diagram doesn't seem easy to find. I have found one but it doesn't give an awful lot of helpful info (at least to me).

So, the next question is, how do i test the contactor and figure out where it is going wrong? The main "power enable" button on the controller isn't lighting up either but trying to find if that is a possible root of the problem or if it is a symptom of the failing contactor is confusing me.

As time goes on i'm sure i will be able to understand, at least roughly, what the general setup on this is but working "blind" is far from ideal...


Anyway, as usual, any advice or ideas would be gratefully recieved!

Thanks,

Mort