Ok at machine. Everything cleaned and checked.

I've gone through your notes and tried several times I'm still getting an axis exceeded fault each time.

This is what happens from power on...

Screen shows: Datum to home

I press Datum, machine tells me it's datuming the xyz axes.
Once finished I press Alt and screen shows X=0.005, Y=0.005, Z=149.976

Screen shows:Select Key
I follow your instructions on tool head setting etc.

Start job and whichever job I select instantly screen throws up:
Limit exceeded in 'x or y or z' position

I'm going to set up the same drawing in Alphacam and save it 3 times with different names, all other variables the same... to see what happens



Sent from my Mi A1 using Tapatalk