Threaded View
-
23-07-2020 #1
I need to put a couple of connection parts onto an assembly of this kind:
At first, I thought just to drop them onto a rotary table or indexer and run a 90 degree cutter back and forth every 15 degrees or so, cutting the teeth out radially from the centre but I quickly realized that that would mean contact only on the very outer edge or circumference of the part. So they would look like they are locked together but in fact, none of the faces on the inside would be in contact at all as they would all be falling away from each other.
This one left me really scratching my head. I’ve not cut gears or anything like this before so there may be something obvious I’m missing. Any advice appreciated.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
3mm dia end mill for cutting carbon fibre sheet?
By loadlover in forum Tool & Tooling TechnologyReplies: 1Last Post: 10-11-2018, 11:15 AM -
Please help me select a vendor for Hobby manual mill
By suspension in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 03-03-2018, 12:37 PM -
Mini-Mill / Router - Cutting Fluid??
By Davek0974 in forum Milling Machines, Builds & ConversionsReplies: 9Last Post: 23-02-2016, 03:19 PM -
Help required with desktop cnc build - cutting out the required plates
By alanb in forum OpenBuilds OX CNC MachineReplies: 0Last Post: 08-07-2014, 03:11 PM -
WANTED: CNC Mill/Router for Cutting Aluminium
By kylelnsn in forum Items WantedReplies: 5Last Post: 09-08-2012, 09:54 PM
Bookmarks