Hi I realise the cutting area will be smaller the outside measurements need to be around the 100cm by 60cm size hopefully will end up with a cutting area around 30cm by 60cm.
The motor details are
Inductance(Bipolar Serial): 12.8mH ± 20%(1KHz)
Inductance(Bipolar Parallel): 3.2mH ± 20%(1KHz)
Inductance(Unipolar): 3.2mH ± 20%(1KHz)
Support rails are 100cm, 60cm and 30cm long
Not sure type of end bearing but I do have them
The 80x40 profile I have a couple of pieces 50cm long and a local company has promised me 2 lengths 100cm long and 4 lengths 60cm long and maybe some more hopefully.
I can cut steel with angle grinder and drilling is no problem.
I don't have a welder so would have to get someone to do it for me.
Albert