Please help with this build Albert

[Kitwn]

Hi Kit just watched the video I think for a first machine it cut great. How accurate was the machine.
Will you post a clip of the machine you are now using
Albert

That attempt was complete rubbish. The main weakness was the gantry which as a single lightweight beam would twist under minimal load. I soon upgraded that to two parallel pieces of the same stock which gave me something capable of cutting out thin MDF and plywood pieces at low feed rates.

My current beast is a steel framed machine with nothing of the original one left except the cheap Chinese breakout board and the computer running LnuxCNC. I'll put up a video of it doing something when I have time to make it do something.

Kit