Quote Originally Posted by bigal999 View Post
Hi what size plate would I need for the sides of X and y axis also do you have any rough dimensions of the plate I would need just to give me a starting point to work out the bits I need please.
Albert
Albert, this is why I said Step #1 is a plan. Do a accurate drawing of the machine and it will tell you all the sizes.
If using the design like picture Kit posted then 15mm plate as a minimum for the gantry sides. The height of the sides will depend on the clearance and Z travel you require, again drawing a plan of the machine will help with all this.

Don't be tempted to skip the steps or design on the fly as it's a recipe for failure and will cost you more money long term.