Hybrid View
-
09-11-2009 #1
The best thing I did was to go with an ER32 collet chuck for the lathe.
The reason being that the collets are closed from the front sp that work can be fitted through the spindle bore. I have a set of mt3 collets but are only suted to short lengths as the draw bar gets in the way.
I suppose you could always make a hollow draw bar is you are sticking below 10mm, on second thoughts that may not work as the mt3 thread is 3/8.
The Er collet has a wider range than most collet systems also using a collet will allow the work to be replaced for further machining.
Peter
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: 1908 Drummond B type flatbed lathe
By Doc in forum Items For SaleReplies: 0Last Post: 15-05-2013, 10:32 AM -
WANTED: 80mm lathe chuck, 3 or 4 jaw
By Jonathan in forum Items WantedReplies: 9Last Post: 07-03-2013, 01:04 PM -
WANTED: 4" / 100mm lathe chuck
By Jonathan in forum Items WantedReplies: 0Last Post: 23-04-2012, 03:05 PM -
Mini Lathe - chuck key, long nose type sourceable?
By HankMcSpank in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 19-10-2009, 01:41 PM -
Anyone got a DXF file for a mini lathe chuck mount?
By HankMcSpank in forum Open Source Designs & PlansReplies: 10Last Post: 14-08-2009, 10:34 PM
Bookmarks