I recently had to get a new laptop and now my machine wont work. I am running mach 3 with a uc300eth motion controller and a cheap 5 axis breakout board.
I have setup mach exactly as i had it as before using the xml file from previous install and i cant get any motion to the motors. Mach dro's move but not the motors.
I have checked the connection to the uc300 and that is fine. i have power and communication. mach loads the uc300 plugin fine and the output test app works and registers the outputs.
I have tried uninstalling and reinstalling mach and tried a new profile but to no avail.
the estop is working, spindle relay comes on but does nothing and tool probe and limits work fine.

i have absolutely no idea whats gone wrong so if someone can point me in the right direction it would be much appreciated.