What is a decent spindle relay ?

[John11668]

Right so what is the difference between this
https://www.cnc4you.co.uk/Breakout-B...th-Charge-Pump

And this
https://www.ebay.co.uk/itm/CNC-5-Axi....c100005.m1851

Apart from having to wait a couple of weeks that is

[Doddy]

Of interest - your old CP0-10V - you said that didn't last long. What happened to it?, how did it fail? And do you still have it? There's limited interest in a dead board but it's an expensive board to replace - if you wanted me to have a quick look to see if there's anything repairable on the board I could take a look for you if you cover postage.

[John11668]

Of interest - your old CP0-10V - you said that didn't last long. What happened to it?, how did it fail? And do you still have it? There's limited interest in a dead board but it's an expensive board to replace - if you wanted me to have a quick look to see if there's anything repairable on the board I could take a look for you if you cover postage.

Would be quite happy to send for your inspection doddy. PM your contact details . Basically one day it stopped responding to a power supply .Led no longer came on

[Clive S]

Right so what is the difference between this
https://www.cnc4you.co.uk/Breakout-B...th-Charge-Pump

And this
https://www.ebay.co.uk/itm/CNC-5-Axi....c100005.m1851

Apart from having to wait a couple of weeks that is

About £40. With it you do need a 12-24V power supply + a 5V one as well although you can power the 5 volts from a usb but personally I don't do that.

I have used plenty of them without trouble