Quote Originally Posted by Ross77 View Post
I will definatly take you up on that offer, If you make the board bigger than 4"x3" will i be able to veiw and output it myself? Good info on the PCB fabrication but think it will be too costly for a one off, as i plan to mill future pcbs.
I'll try to fit into 100x80mm (this is the maximum size for the free version). However, I think you would be able to load the larger size in, but you probably won't be able to move the components that are outside the area around.

There are techniques to squeeze it into a smaller space, but I'll avoid them (basically, moving to surface mount components) unless you've got a particular desire to solder really small components

Send me a PM (let me know when you've done it - I think the last one didn't arrive), and I'll give you the details. I can have a rough idea as to whether it'll fit or not probably in an hour or so.