Cncst4060

[petesos]

[Doddy]

There's content online using the part-number as a google search term that references out to a H100 series VFD manual. Yes, part-numbers are totally different but they are visually very similar. I'm treading cautiously because the part numbers are different.

https://www.mediafire.com/file/yn83l...anual.pdf/file

Have a quick read and work out how to read the F-parameters (probably SET and Up/Down keys). Read-out (but don't change anything!) the F001, F002, F044, F045, F046, F047, F048 and F049 parameters and report back. Provided that the manual is appropriate for the VFD that will tell us how the spindle on/off and speed is controlled (F001/002) and how 6 discrete inputs wired to the VFD are set to operate (i.e. if they can be used for control).

Also, on the VFD (the bit that connects via a ribbon to the display panel on the front of the enclosure) - there's obviously 220VAC provided into the VFD, and three high-current cables going to the VFD connector, but there's also Black, Red and White cables running under a cover - can you remove the cover and photograph where these are connected to the VFD?, there should be two terminal strips under the cover with the cables connected to individual terminals - that will absolutely help to understand any automation presented to the VFD.

[petesos]

Will do it now